K250 / SD250 Operating Manual
2.7
Turning On the Power
1)
Press the red button.
2)
The power indicator lights.
3)
Start up screen is displayed on LCD viewing screen denoting initialisation.
4)
After initialisation, the thermal imager operates in Normal Imaging Mode and a thermal
image is displayed.
CAUTION!
Always fit a fully charged battery prior to use in an emergency operation.
2.8
Turning Off the Power
1)
Press and hold the red
button to activate the
shutdown menu which can
be accessed in normal
imaging mode:
2)
To turn off:
3)
Or to cancel the command:
4)
Power light switches off indicating shutdown complete.
CAUTION!
Never disconnect the battery without undertaking this turn off procedure.
Press
& Hold
Release
Press
& Hold
Release
Press
& Hold
Release
No Screen Message
© 2014, Infrared Systems Group Ltd.
Page 8 of 20
K01 POM 007A -67
