Isel LES4, Руководство по сборке

Страница: 11 / 52

Linear units with spindle drive LES 4, 5, 6
11 / 52 April 2019
Ordering key
Ordering key
Ordering key
2 3 4 X X X 0 X X X
2 3 4 X X X 0 X X X
2 3 4 X X X 0 X X X
Drive
Drive
Drive
0 = Preparation
3 = Preparation
6 = Preparation
Direct drive module
Direct drive module
Direct drive module
1 = Preparation
4 = Preparation
7 = Preparation
Belt drive module
Belt drive module
Belt drive module
Shaft slide
Shaft slide
Shaft slide
0 = 1 shaft slide 70 mm
0 = 2 shaft slides 70 mm
0 = 2 shaft slides 70 mm
2
2
2
= 2 shaft slides 70 mm
= 4 shaft slides 70 mm
= 4 shaft slides 70 mm
Ball screw drive
Ball screw drive
Ball screw drive
0 = non
0 = non
0 = non
1 = Pitch 2.5 mm
1 = Pitch 2.5 mm
1 = Pitch 2.5 mm
2 = Pitch 4.0 mm
2 = Pitch 4.0 mm
2 = Pitch 4.0 mm
3 = Pitch 5.0 mm
3 = Pitch 5.0 mm
3 = Pitch 5.0 mm
4 = Pitch 10 mm
4 = Pitch 10 mm
4 = Pitch 10 mm
5 = Pitch 20 mm
5 = Pitch 20 mm
5 = Pitch 20 mm
Profile length (L1)
Profile length (L1)
Profile length (L1)
e.g.: 029 = 290 mm (min.)
e.g.: 029 = 290 mm (min.)
e.g.: 029 = 290 mm (min.)
299 = 2990 mm (max.)
299 = 2990 mm (max.)
299 = 2990 mm (max.)
Standard profile lengths can be
Standard profile lengths can be
Standard profile lengths can be
ordered in steps of 100 mm!
ordered in steps of 100 mm!
ordered in steps of 100 mm!
(reduced by the last digit)
(reduced by the last digit)
(reduced by the last digit)
for direct drive module
for direct drive module
for direct drive module
for belt drive module
for belt drive module
for belt drive module
Options
isel linear units LES4-5-6 are usually supplied without a drive module.
They are prepared either for mounting flanged direct drive modules or lateral or integrated belt drive
modules.
However, appropriate direct drives can be mounted on request.