1 General information
This crate device is used operating iseg High Voltage power supply modules in a 19“ rack compatbile case. Depending on version it
provides module slots for up to 10 MMS LV compatible Low Voltage and also HV compatible High Voltage modules or mixed setups.
Each module is connected to a backplane of the crate by a vendor specific connector, which delivers module power supply and CAN
based digital interface connection.
Depending on module’s features further digital and analog signals are provided by the connector (safety loop, thermal sensors etc.). For
control and network communication of the MMS modules a crate controller needs to be plugged into a special Crate Controller Slot. The
ECH 5xA is compatible with iseg CC24 Master, CC23 Slave Controller and Wiener MPOD controller. The CC24 Master controller is
equipped with integrated Linux server, hardware running iseg iCS System, ethernet and optional WiFi connectivity. Up to eight CC23
Slave controller can extend a CC24 system by using galvanically isolated CAN connections and auto adressing.
CAUTION!
CAUTION!
It is not allowed to use the unit if the covers have been removed!
ISEG declines all responsibility for damages and injuries caused by an improper use of the module. It is highly
recommended to read the manual before any kind of operation.
ECH5xA – 10 Slot MMS Crate | Last modified on: 07.10.2019| www.iseg-hv.com
4/16
