11.2.1.
How to connect via WiFi
1)
Make sure to have the WiFi adapter onboard or external installed, all modules are plugged in and CAN connections if
used attached. Start the crate or device.
2)
Use your mobile device or computer to search for existing WiFi networks and select „iseg-iCS_XXXX“ (serial).
Enter the factory default password (
password
).
3)
Open a recommended web-browser and enter the factory default IP address (
192.168.1.1
)
4)
Enter the factory default username (
admin
) and password (
password
)
11.2.2.
How to connect via Ethernet
For Ethernet connections with the use of factory defaults, it is necessary to know the IP address of the iCS server first.
By default the iCS is configured to obtain the IP automatically by DHCP. To discover the IP address of the iCS, a small software
application iCSfinder can be used. It scans the local network for running iCS services.
iCS also provides UPnP and Zeroconf/Bonjour messages, which can be discovered, e.g. in Windows using „Network“ environment.
INFORMATION
INFORMATION
To discover iCS installations on the local network, a small utility
iCSfinder
can be used
It can be downloaded here:
https://iseg-hv.com/download/?dir=SOFTWARE/iCS/iCSfinder/
Note: If you wish to set a fixed address without preconnecting via DHCP, please use a (temporarily)
WiFi connection to setup OR follow the instructions of (re)setting the ethernet settings (see chapter
11.3.1 Ethernet configuration)
Hint: If you experience problems using iCSfinder, please try using free software tools like “IP
SCANNER” / MAC or “ADVANCED IP SCANNER” (Windows)
1)
Make sure to have the network cable, all modules plugged in and all CAN connections if used attached. Start the crate.
2)
Open a recommended web-browser and enter the current IP address (see preparations before)
3)
Enter the factory default username (
admin
) and password (
password
)
Crate Controller CC24/CC23 | Last change on: 14.04.2020 |
www.iseg-hv.com
22/44
