INDOOR CHIME
Step 1 Set up your device
• Plug your iseeBell indoor chime into a 100 –
240v outlet. It will let out a beep, light up,
then off.
• Press the
Mode
button, so that it switches
between “chime only”, “light only” and “both
chime and light”. Select your preferred mode
for when someone rings the bell. “Chime
only” will beep once. For “light only”, the
LED blinks once while “Both Chime and
light” will have your iseeBell beep once and
LED blinks once as well.
Step 2 Pair your iseeBell indoor chime with
your iseeBell video doorbell
• Press and hold the
Setup
button for 5 seconds.
• LED light will turn red and indoor chime will
enter pairing mode with a beep.
• Press the Call button on your iseeBell Video doorbell while
in pairing mode.
• Indoor chime will react accordingly based on your mode
selection.
• To exit, press the
Setup
button and it will beep twice.
• Indoor chime will automatically exit pair mode after 10
seconds if you don’t press any buttons.
• Important note: One indoor chime can pair with at most
3 video doorbells.
How to set it up
3
INDOOR CHIME
2
• To assemble, line up
the AC adapter plug
with the slots. Then
push the plug in and
twist until it clicks.
• To disassemble, press
and hold the release
button and twist the
AC adapter plug.
Assemble
Disassemble
Available AC adapter plug
UK
EU
AUSTRALIA
US/CANADA
