IGEP
TM
SMARC iMX6
Hardware Reference Manual
ISEE 2007 S.L. All rights reserved, IGEP is a registered trademark from ISEE 2007 S.L. The following is provided for informational purposes only.
NIF:ESB64377005 Document:
MAN-IGEP0046-001
/ Revision:
1.3
/ Date:
23/06/2016
4
1
USER INFORMATION
1.1
ABOUT THIS DOCUMENT
This document provides information about products from ISEE 2007 SL and/or its subsidiaries. No warranty of
suitability, purpose, or fitness is implied. While every attempt has been made to ensure that the information
in this document is accurate, the information contained within is supplied “as-is” and is subject to change
without notice.
For the circuits, descriptions and tables indicated, ISEE 2007 SL assumes no responsibility as far as patents or
other rights of third parties are concerned.
1.2
COPYRIGHT NOTICE
This document is copyrighted, 2013-2016, by ISEE 2007 SL.
All rights are reserved. ISEE reserves the right to make improvements to the products described in this
manual at any time without notice. No part of this manual may be reproduced, copied, translated or
transmitted in any form or by any means without the prior written permission of the original manufacturer.
Information provided in this manual is intended to be accurate and reliable. However, the original
manufacturer assumes no responsibility for its use, nor for any infringements upon the rights of third parties,
which may result from its use.
1.3
TRADEMARKS
IGEP
TM
®
is
trademark of ISEE. ISEE is trademark or registered trademark of ISEE 2007 SL.
Product names, logos, brands and other trademarks featured or referred to within this user’s guide, or the
ISEE website, are the property of their respective trademark holders. These trademark holders are not
affiliated with ISEE, our products or our website.
1.4
STANDARDS
ISEE 2007 S.L. is going to be certified to ISO 9001:2015
1.5
WARRANTY
THE FOREGOING WARRANTY IS THE EXCLUSIVE WARRANTY MADE BY SELLER TO BUYER AND IS IN
LIEU OF ALL OTHER WARRANTIES, EXPRESSED, IMPLIED, OR STATUTORY, INCLUDING ANY
WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE.
The user assumes all responsibility and liability for proper and safe handling of the goods. Further, the user
indemnifies ISEE 2007 SL from all claims arising from the handling or use of the goods. Due to the open
construction of the product, it is the user’s responsibility to take any and all appropriate precautions with
regard to electrostatic discharge.
EXCEPT TO THE EXTENT OF THE INDEMNITY SET FORTH ABOVE, NEITHER PARTY SHALL BE LIABLE
TO THE OTHER FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES.
ISEE 2007 SL currently deals with a variety of customers for products, and therefore our arrangement with the
user is not exclusive. ISEE assumes no liability for applications assistance, customer product design, software
performance, or infringement of patents or services described herein.
