ISE | (800) 463-7731 www.ise-group.com
7 of 8
Put Workcenter Upright and Connect Power Cord to the Power Supply
With the Workcenter at its lowest height, turn the assembled desk right-side up with at least two people.
NOTE: Grab the desk Frame (not the desktop) and turn the desk right-side up.
Plug the Power Cord (H) into a 110 V outlet.
Initialize Legs
Press and hold the DOWN button on the Switch (G) until the desk reaches its lowest height. Release the
DOWN button.
Press and hold the DOWN button again until the LED display reads “RST” or about 10 seconds on non-LED
handset models. Release the DOWN button.
Press and hold the DOWN button a third time until the desk lowers a little bit more, slightly rises and stops.
Release the DOWN button. Your desk is now ready to use.
You must complete this
initialization step or your
workcenter will NOT
function properly.
Cleaning Instructions
To clean the Ascent legs, apply cleaner to a soft cloth.
Suggested cleaners: Windex or Formula 409.
Do not use solvents and do not saturate or spray cleaners directly onto workcenter base.
Hold down the down arrow
until workcenter moves slightly
upwards!
Adjust Feet Glides
If necessary, adjust Leveling Glides on workcenter feet to level the worksurface. Unscrew to increase height,
screw in to decrease height.
9
H
a
a
b
b
11
b
c
a
10
✓
