Operating instructions
*All pictures, statements and text information of this product are for reference only.
Please refer to the actual information on the official website www.isdt.co.
SHENZHEN ISD TECHNOLOGY CO.,LTD reserves the right for final explanation and modification of the specification.
1. Plug the 2~6S Lipo battery with XT60 to input port, the indicator light turns
green means normal state. If the cell amounts setting on UC1 is not match the
battery cells, the indicator light turns purple or red at slow flash.
2. Press and hold the button for 3 seconds until the light turns cyan, it enters the
setup state to set the battery cells.
3. The cyan light flash times is the battery cells that have been set. Press the
button to alter the battery cells within 2~6S running in cycle. When the
cyan-light flash times are same as battery cells, press and hold the button
more than 3 seconds and it will save the setting and exit.
4. Press button can check the battery cells during charging. The flash times
of the green light is the battery cells.
5. When the red light flash slowly it indicates low battery capacity, you should
cut off to prevent the over-discharge, otherwise, it will consume current internal.
