iS5 iES12G Скачать руководство пользователя страница 85

Страница: 85 / 102

iES12G User’s Manual

iS5 Communications Inc.

Label

Description

Rx and Tx Packets The number of received and transmitted (good and bad) packets.

Rx and Tx Octets

The number of received and transmitted (good and bad) bytes. Includes FCS,
but excludes framing bits.

Rx and Tx Unicast The number of received and transmitted (good and bad) unicast packets.

Rx and Tx Multicast The number of received and transmitted (good and bad) multicast packets.

Rx and Tx

Broadcast

The number of received and transmitted (good and bad) broadcast packets.

Rx and Tx Pause

A count of the MAC Control frames received or transmitted on this port that
have an opcode indicating a PAUSE operation.

Rx Drops

The number of frames dropped due to lack of receive buffers or egress
congestion.

Rx CRC/Alignment The number of frames received with CRC or alignment errors.

Rx Undersize

The number of short 1 frames received with valid CRC.

Rx Oversize

The number of long 2 frames received with valid CRC.

Rx Fragments

The number of short 1 frames received with invalid CRC.

Rx Jabber

The number of long 2 frames received with invalid CRC.

Rx Filtered

The number of received frames filtered by the forwarding process.

Tx Drops

The number of frames dropped due to output buffer congestion.

Tx Late / Exc.Coll. The number of frames dropped due to excessive or late collisions.

Short frames are frames that are smaller than 64 bytes.
Long frames are frames that are longer than the configured maximum frame length for this port.

Содержание iES12G







































































































Результаты поиска

Содержание iES12G

Отзывы:

Бренды по названию

Популярные бренды

iS5 iES12G, Руководство пользователя

Результаты поиска

Содержание iES12G

Отзывы:

Бренды по названию

Популярные бренды