CHAPTER:
LOGIN AND MANAGEMENT,
SECTION:
PRIVILEGE LEVEL
UM-G-iSG18GFP-4.5.06.1-EN.docx
© 2020 IS5 COMMUNICATIONS Inc. ALL RIGHTS RESERVED
7.8 Privilege Level
To allocate system accessibility to different users in the best way, privilege levels can be determined.
A total of 16 levels numbered from 0 to15 can be configured. By default, the root user holds privilege level 15, allowing
complete system availability. Privilege level 0 is the lowest level, restricting the user to minimum system access. A
user with privilege level 0 can access only the following commands:
•
Enable
•
Disable
•
Exit
•
Help
•
logout
Users with privilege level 1 can access all user-level commands with iSG18GFP> prompt.
Users with privilege level 15 can access all commands. It is the least restricted level.
7.8.1 Commands Description
Table 16 – Commands Description
Command
Description
VLAN Module status
Enable
Config
Username <user-name> Specifies the login user name to be created
Password <passwd>
Specifies the password to be entered by the user to login to
the system.
Password must contain 8-20 characters and should include at
least one of each character type:
* special character
* alphabetic character
* numerical character
* uppercase character
* lowercase character
Special characters supported:
!@#$%^&*(){}[]/\`~+=
privilege <1 or15>
Applies restriction to the user for accessing the CLI
