iSC2F User’s Manual
UM-iSC2F-2-EN.docx
Pages 10 of 12
Hardware Installation
The ISC2F is designed for maximum mounting and display flexibility. It can be equipped with
connectors that allow it to be installed in a DIN rail.
3.1
DIN Rail Installation
For DIN rail installations, the ISC2F can be equipped with a DIN rail bracket pre-installed
on the back of the chassis. The bracket allows the device to be slid onto a standard 35
mm (1.4 in) DIN rail.
To mount the device to a DIN rail, perform the following:
1.
Align the slot in the bracket with the DIN rail.
2.
Pull the release on the bracket down and slide the device onto the DIN rail. If
necessary, use a screw driver to unlock the release. Let go of the release to lock the
device in position.
Step 1
Step 2
