IS5 COMMUNICATIONS iES24G Скачать руководство пользователя страница 5

Страница: 5 / 100

iES24G Series User’s Manual

iS5 Communications Inc.

FCC Statement and Cautions

Federal Communications Commission Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment. This equipment can generate,

use, and radiate radio frequency energy. If not installed and used in accordance with the instruction manual,

may cause harmful interference to radio communications. Operation of this equipment in a residential area

is likely to cause harmful interference in which case the user will at his/her own expense, be required to

correct the interference.

Caution: LASER

This product contains a laser system and is classified as a CLASS 1 LASER PRODUCT. Use of controls or

adjustments or performance of procedures other than those specified herein may result in hazardous radiation

exposure.

Caution: Service

This product contains no user-serviceable parts. Attempted service by unauthorized personnel shall render all

warranties null and void.

Changes or modifications not expressly approved by iS5 Communications Inc. could invalidate specifications, test

results, and agency approvals, and void the user's authority to operate the equipment.

Should this device require service, please contact [email protected].

Caution: Physical Access

This product should be installed in a restricted access location. Access should only be gained by qualified service

personnel or users who have been instructed on the reasons for the restrictions applied at the location, and any

precautions that have been taken. Access must only be via the use of a tool or lock and key, or other means of

security, and is controlled by the authority responsible for the location.

Содержание iES24G





































































































Результаты поиска

Содержание iES24G

Отзывы:

Похожие инструкции для iES24G

Бренды по названию

Популярные бренды

IS5 COMMUNICATIONS iES24G, Руководство пользователя

Результаты поиска

Содержание iES24G

Отзывы:

Похожие инструкции для iES24G

Бренды по названию

Популярные бренды