iES12G
User’s
Manual
UM-iES12G-1.72.2-EN.docx
Pages 69 of 166
© 2020 IS5 COMMUNICATIONS INC. ALL RIGHTS RESERVED
Label
Description
Delete
Check to delete the entry. It will be deleted during the next save.
Private VLAN ID
Indicates the ID of this particular private VLAN.
Port Members
A row of check boxes for each port is displayed for each private VLAN ID. You
can check the box to include a port in a private VLAN. To remove or exclude
the port from the private VLAN, make sure the box is unchecked. By default,
no ports are members, and all boxes are unchecked.
Adding a New
Private VLAN
Click
Add new Private V LAN
to add a new private VLAN ID. An empty row is
added to the table, and the private VLAN can be configured as needed. The
allowed range for a private VLAN ID is the same as the switch port number
range. Any values outside this range are not accepted, and a warning message
appears. Click
OK
to discard the incorrect entry, or click Cancel to return to the
editing and make a correction.
The private VLAN is enabled when you click
Save
.
The
Delete
button can be used to undo the addition of new private VLANs.
Save
Click to save changes.
Reset
Click to undo any changes made locally and revert to previously saved values.
Auto-refresh
Check this box to refresh the page automatically. Automatic refresh occurs
every 3 seconds.
Refresh
Click to refresh the page immediately
Port Isolation Configuration
This page is used for enabling or disabling port isolation on ports in a Private VLAN (PVLAN). An isolated
port cannot communicate with other ports within the same PVLAN.
A port member of a VLAN can be isolated from other isolated ports on the same VLAN and Private VLAN.
Figure 68
–
Port Isolation Configuration
Label
Description
Port Number
A check box is provided for each port of a private VLAN.
When checked, port isolation is enabled for that port.
When unchecked, port isolation is disabled for that port.
By default, port isolation is disabled for all ports.
Refresh
Click to refresh the page immediately.
Auto-refresh
Check this box to refresh the page automatically. Automatic refresh occurs every
3 seconds.
Save
Click to save changes.
Reset
Click to undo any changes made locally and revert to previously saved values.
