IS5 COMMUNICATIONS IES12G Скачать руководство пользователя страница 50

Страница: 50 / 177

iES12G

User’s

Manual

UM-iES12G-1.72.2-EN.docx

Pages 39 of 166

Figure 44

–

LACP System Status

Label

Description

Aggr ID

The aggregation ID is associated with the aggregation instance.

For LLAG, the ID is shown as '

isid:aggr-id

' and for GLAGs as '

aggr-id

Partner System ID

System ID (MAC address) of the aggregation partner.

Partner Key

The key assigned by the partner to the aggregation ID.

Last Changed

The time since this aggregation changed.

Local Ports

Shows which ports are a part of this aggregation for this switch.

Refresh

Click to refresh the page immediately.

Auto-refresh

Check to enable an automatic refresh of the page at regular Intervals.

LACP Port Status

This page provides an overview of the LACP status for all ports.

Figure 45 - LACP Status

Label

Description

Port

Switch port number.

LACP

Yes

means LACP is enabled and the port link is up.

means that LACP is not enabled or

the port link is down.

Backup

means the port cannot join in the aggregation group

unless other ports are removed and is in disabled LACP status.

Key

The key assigned to this port. Only ports with the same key can be aggregated.

Aggr ID

The aggregation ID assigned to the aggregation group.

Partner
System
ID

The partner

’

s system ID (MAC address).

Partner
Port

The partner

’

s port number associated with the port.

Refresh

Click to refresh the page immediately.

Auto-
refresh

Check to enable an automatic refresh of the page at regular intervals.

Содержание IES12G


















































































































































































Результаты поиска

Содержание IES12G

Отзывы:

Похожие инструкции для IES12G

Бренды по названию

Популярные бренды

IS5 COMMUNICATIONS IES12G, Руководство пользователя

Результаты поиска

Содержание IES12G

Отзывы:

Похожие инструкции для IES12G

Бренды по названию

Популярные бренды