Page
8
Outdoor and Open Vessel Installation
The SLM600 can be simply mounted on a bracket, suitable for the application and secured using
the thread located at the top of the transducer (2”NPT).
Care should be taken to ensure that the SLM600 is not installed in direct sunlight, in order to avoid
errors in the measurement of ambient temperature.
Attention should also be taken, when mounting the unit, to ensure that strong windy conditions are
avoided, wherever possible, to prevent abnormal operation.
Closed Vessel Installation
The SLM600 can be simply screwed into a flange and secured using the thread located at the top
of the transducer (2”NPT).
Where possible use a flange made of a synthetic material such as PVC, to avoid vibration
Place a rubber gasket between the flange of the Sondar and the connection to the vessel to avoid
vibration.
30 cm
Minimum
Bracket
Nut
