iRZ MC52i-485GI, Руководство пользователя

Страница: 13 / 19

13
The modem automatically stores the number of the following situations:
Power_Modem or the number of times the modem has been turned on
Bad_Power_Modem or the number of times the modem power has deviated from the allowed
Power_Module or the number of times the power of the GSM module has been turned on
Bad_Power_Module or the number of times the GSM module power has deviated from the allowed
Start_Module or the number of the successful launches of the GSM module
Bad_Start_Module or the number of situations when the GSM module failed to launch
Deadlock_of_Module or the number of GSM module deadlocks
Reset or the number of resets.
After the statistics appears the transition to the main menu occurs.
Use < P2 > command to proceed to the WD submenu:
WD interval, hour (0 - WD off, max - 255)
<Q> Quit
WD interval=
To change the reboot interval, enter a number from 0 to 255 (by pressing “Enter”). The reboot interval is set
in hours. If you need to switch off this function enter 0. Keep in mind that after the set interval expires, the
unconditional reboot of the modem will occur. In case incorrect information is entered the modem displays
“ERROR” and offers the WD submenu once again. In case correct information is entered or < Q > command is
sent a transition into the main menu takes place.
Use < P3 > command to proceed to the AT submenu:
'AT' control, minutes (0 - off, max - 255)
<Q> Quit
control=
In this submenu the interval of the periodical check by the managing microcontroller of the GSM module
deadlock is set. To change the interval of the check enter a number from 0 to 255 by pressing “Enter”. The
reboot interval is set in minutes. If you need to switch off this function enter 0. In case incorrect information is
entered the modem will show “ERROR” and will offer the AT submenu once again. In case correct information
is entered or < Q > command is sent a transition into the main menu will take place.
After entering the < PC > command review the input voltage and the voltage of the module (measurement
precision 5%):
P0WER Uin=12.0 Umd=3.9
After the output a transition into the main menu occurs.