4510-HDA.ib.Rev0.doc
Page 4 of 12
19/07/2006
Technical Specifications
IRT Eurocard module
Type HDA-4510
Input:
Number 1.
Type
1.485 Gb/s High Definition, or
270 Mb/s Standard Definition.
Impedance 75
Ohm.
Return loss
*
>20 dB 5 MHz to 270 MHz, >15 dB to 1.485Gb/s.
Equalisation
Automatic, >250 metres at 270 Mb/s, >100 metres at 1.485 Gb/s
for Belden 8281 or equivalent cable.
Outputs:
Number
6 HD or SD, output slew rate automatically selected.
Signal level
800 mV ± 10%
Impedance 75
Ohm.
Return loss
*
>20 dB 5 MHz to 270 MHz, >15 dB to 1.485Gb/s.
DC offset
Nil.
Performance:
Output rise time
<200 ns, (180 ns typically).
Residual Jitter
<0.15 UI at 1.485 Gb/s (measured with up to 100m of Belden 8281 or equivalent
cable)
Connectors:
BNC.
Indicators:
Power
LED (green) for +5 Vdc.
Signal present
LED (green) when signal present.
HD
LED (green) when input signal is 1.485 Gb/s HD.
SD
LED (yellow) when output signal is 270, 360 or 540 Mb/s SD.
Power requirement:
Voltage
28 Vac CT (14-0-14) or
±
16 Vdc
Consumption 4.0
VA.
General:
Temperature range
0 - 50° C ambient
Mechanical
Suitable for mounting in IRT 19" rack chassis with input, output and power
connections on the rear panel.
Dimensions
6 HP x 3U Extended Eurocard (220 mm x 100 mm).
Weight
With rear assembly 385g.
Finish: Front panel
Grey background, silk-screened black lettering & red IRT logo
Rear assembly
Detachable silk-screened PCB with direct mount connectors to Eurocard and external
signals
Supplied accessories
Rear connector assembly with matching connector for alarm outputs.
Optional accessories
SMU-4000 SNMP plug-in module for use with 4000 series frame fitted with SNMP
“Agent”
* Note:
When mounted in an IRT 1000 or 4000 series frame.
Due to our policy of continuing development, these specifications are subject to change without notice.