1000-ams.ib.rev1.doc
Page 6 of 9
16/10/2007
Installation
Handling:
The AMS-1000 has no specific handling requirements
When individual modules are stored no specific storage requirements are recommended.
Power:
The AMS-1000 being totally passive has no power requirements.
Earthing:
There is no earth system built into the AMS-1000. This is being due to the unit not having any active components
installed.
For shielding reasons the AMS-1000 should be earthed to the rack the unit has been installed in. If the AMS-1000
has not been installed into a racking system a technical earth should be attached to the chassis to help with shielding
considerations
Installation:
The AMS-1000 is a 1 RU box that slots straight into your standard racking system. There are no adjustments to be
made to this unit.
Once you have installed the unit into your rack, connect the cables to the appropriate connectors.
Audio Connections:
The AMS-1000 can handle either Unbalanced Stereo or Balanced Mono Audio connections.
The appropriate wiring configurations can be found in the diagrams below.
1
2
3
-
+
Gnd
Balanced line
→
XLR Connector
Unbalanced Stereo
→
RCA Connectors
-
+
Gnd
L
R
2 x RCA
