To turn the laser pointer ON, press the
LASER
key while pressing the
ON/HOLD
key.(Fig.E) Press the
LASER
key again to turn the laser
OFF. (Fig.F)
Holding the meter by its handle, point
the IR Sensor toward the object
whose temperature is to be measured.
The meter automatically compensates
for temperature deviations from
ambient temperature. Keep in mind
that it will take up to 30 minutes to
adjust to wide ambient temperature
changes.When low temperatures are
to be measured followed by high
temperature measurements,
some time (several minutes) is required
after the low (and before the high)
temperature measurements are made.
This is a result of the cooling process
which must take place for the IR sensor
o
C
o
C
5
F. MEASUREMENT
CONSIDERATIONS
E. LASER POINTER
Fig.E
Fig.F
