Irriland SPORT Series, Инструкция по эксплуатации

Страница: 11 / 16

6) Engage the gear box: Push the knob/lever (05) into the “ working and transport position ” as you
see in Picture 02. Turn the PTO shaft a little if the knob is stuck in place.
7) Open the bypass: Turn the handle on the bypass valve (02) so it is in line with the bypass as
shown in picture 01 position 02.
7) Open the brass control valve: Push the knob on the brass control valve (#10 in pict 07) towards
the sprinkler cart.
8) Connect the water supply: Connect the main line (hydrant valve or pipeline outlet) to the
machine by using the flexible hose as shown in picture 16. The supplied B
-
Type adapter fitting
(picture 17) has male NPT threads for connection to the mainline hydrant valve. Make sure the
flexible hose couplings are well hooked before you open the hydrant: it ’ s a pressurized system and
could be dangerous if it ’ s not managed properly. Open the mainline hydrant valve a little bit until
there is water coming out from the sprinkler and all air is out of the line, then open it completely.
06
PICT. 01 PICT. 02
01 05
02 02
03
PICT. 16
PICT. 17
PICT. 07
10
Page 11