4
Low Battery
Solid Red
USB Transmitter
Indicator
No Power
Red LED off
Linking
Rapid Flashing Red
Transmit Standby
Slow Flashing Red
Transmitting Solid
Red
INSTALLATION
CONNECTING THE AC POWER
An AC-DC Adaptor w ith 7.5V D C 2400mA output (inc luded) is required for operating the main unit.
Plug the AC-DC Adaptor into the unit and into an AC outlet:
1.) Firmly and securely insert the DC plug of the adaptor into the DC Jack on the back of the unit
2.) Plug the Adaptor plug into an outlet rated at 120V ~ 60Hz.
POWER OF INDIVIDUAL SPEAKER
Each speaker has a built-in rechargeable lithium battery for independent playback. Before the first use,
we recommend to charge each speaker battery for
12 hours
. Switch off the speaker power and place it
on the recessed charging area of the powered Docking Base, charging will start automatically. The
charging LED indicator will be flashing blue while the speaker is charging and will switch to solid blue
when charged.
REMOTE CONTROL
The remote control operates on one CR2025 battery (included).
To activate the remote control, remove the insulatio n tab inserted in the
battery compartment.
When the operation of the remote co
ntrol becomes intermittent or
unsatisfactory, replace the original battery with a new 3-volt lithium CR202 5
battery.
1.) Slide out the battery holder from the remote control
case.
2.) Replace the 3V CR2025 battery. Be sure the battery is installed correctly.
The remote will not work if the battery is installed with the wrong polarity.
