SRM-6072
WELCOME TO READ
10
MAINTENANCE
1.TOUBLESHOOTING
Problem Probable
cause(s)
Suggested
remedy
No power source
Check if power source is on or cord
works well.
Fixtures does not work
Fuse burnt
Cut off power source and change the
same type fuse. If fuse was burnt on
end, it may be the problem of
connection; Find qualified professors
to repair.
False or incomplete data
connection
Check, repair or change the data line.
Ensure connection is well and the
first lamp’s single input is connected
with the controller output.
False address setting
Check DMX address.
Problem of signal
connector of some
fixtures
Pull out signal line and butt joint,
trying to find malfunctioned lamp
one by one. Then contact with
professional technicians.
Reset normally, but console
abnormally or no response
Signal output does not
match with the pin
(pins2 and pins3 has a
wrong sequence)
Toggle the PHASE button on the
controller to reverse the polarity.
2.CLEANING
Though increasing reliability by designing well and we never stop to improve quality to lengthen
lamp’s lifespan. It is still indispensable to maintain it well by certain time in order to ensure best
performance
First , c lean fan and vent.
Favorable heat-dissipation and ventilation is vital to lamp’s normal work. So clean the fan and
vent during a certain time to guarantee smooth of wind path. Otherwise dust will barrier vent,
which will affect the performance because of over heat after working for some time.
Second, lens cleaning and maintenance
To ensure the best effect of lamp, please clean every lean or reflective setting. Use the soft cotton
with some lotion to clean it, but do not damage lens.
