#3
Place both Side (A)’s on a clean, carpeted surface as shown. Place Rafix bolts
(H4) in each S ide Panel into the selected pre-drilled holes as indicated.
SIDE
PANELS
FOURTH SET
OF HOLES
FROM BOTTOM
TOP SET OF HOLES
H4
H4
H4
H4
H4
H4
H4
H4
H4
For a 3/4" Back, follow the directions for a
Back Panel. Attach the Back Panel (D) to the
Side (A) as shown. Tighten the Rafix Cams
(H1) 1/2 turn.
#4
H3
H1
H7
D
METAL FRAME
3/4" BACK
For a Metal Frame, attach the Frame (H7) as
shown using five #8 x 5/8" Panhead Screws.
NOTE: If you are installing an Adder, follow the instructions for an Adder unit at this time.
