ALIGNED
FLAT
EDGE
#11
#12
F
Install four Tab-V Plastic Housings
(H9) into the Shelf (F). Using a plastic
mallet, tap the plastic housings into
the pre-drilled holes. Make sure that
the flat edge faces outwards and is
flush with the surface.
IMPORTANT!
The flat edge
of the plastic housing must
be aligned with the shelf
edge. Plastic Housings
cannot be repositioned once
installed.
Slide the Shelf (F) into place over the
Shelf Pins (H8) and push down until
fully seated.
Turn the rotating portion (Cam) 1/2 turn
to lock in place.
To remove, simply turn the Cam counter
clockwise 1/2 turn and lift the shelf off
of the Shelf Pins.
