Position Top (C) onto the Rafix
Bolts (H8) on Divider (F) and Right
Side (B). Using a #3 Phillips
screwdriver, turn the rotating
portions of the Rafix Cams (H2) ¼
turn clockwise to secure.
Note:
Do not exceed ¼ turn when
tightening!
#10
#11
Position the Back (D) as shown onto the bolts
and dowels of the Divider (F). Turn the
arrows of the cams (H1) clockwise to secure.
Note:
Move the cardboard filler from Steps 8
& 9 to support the Adder Back (D). This will
aid you in attaching the Right Side (B).
Position the bolts and dowels of the previously
removed Right Side (B) onto the Back (D) and
turn the arrows of the cams (H1) clockwise to
secure.
#9
