Ironton 73134, Руководство пользователя, Страница: 14 / 19

Page 14 of 19
Failure Possible Cause Corrective Action
2. Blade dull or damaged.
2. Keep blades sharp. Replace as
needed.
Excessive noise
or rattling. Internal damage or wear. (Carbon
brushes or bearings, for example.)
Have technician service tool.
Overheating.
1. Forcing tool to work too fast. 1. Allow tool to work at its own rate.
2. Blade dull or damaged.
2. Keep blades sharp. Replace as
needed.
3. Blocked motor housing vents.
3. Wear ANSI-approved safety
goggles and NIOSH-approved dust
mask/respirator while blowing dust out
of motor using compressed air.
4. Motor being strained by long or
small diameter extension cord.
4. Eliminate use of extension cord. If
an extension cord is needed, use one
with the proper diameter for its length
and load.