Page 6 of 27
Check for damaged parts before each use. Carefully check that the product will operate properly
and perform its intended function. Replace damaged or worn parts immediately. Never operate the
product with a damaged part.
Do not use a product with a malfunctioning switch. Any power tool that cannot be controlled with
the power switch is dangerous and must be repaired by an authorized service representative
before using.
Disconnect the power/air supply from the product and place the switch in the locked or off position
before making any adjustments, changing accessories, or storing the tool. Such preventive safety
measures reduce the risk of starting the tool accidentally.
Store the miter saw when it is not in use. Store it in a dry, secure place out of the reach of children.
Inspect the tool for good working condition prior to storage and before re-use.
Use only accessories that are recommended by the manufacturer for use with your product.
Accessories that may be suitable for one product may create a risk of injury when used with
another tool. Never use an accessory that has a lower operating speed or operating pressure than
the tool itself.
Keep guards in place and in working order. Never operate the product without the guards in place.
Do not leave the miter saw running unattended.
Specific Operation Warnings
⚠
WARNING
Cutting hazard. Keep hands away from cutting area. Never use your hands to remove sawdust,
chips, or a workpiece near the saw blade or the cutting path of the saw.
Always wear eye protection. Always wear protective gloves when handling saw blades.
Wear NIOSH compliant dust masks or other respiratory protection during operation.
Do not wear gloves, jewelry, or loose clothing.
Do not use in the rain or in a damp location.
Wait for the wheel to come to a complete stop before removing material.
Only use a saw blade suitable for both your miter saw and your workpiece. The maximum
permissible speed of your saw blade should be higher than the maximum rotational speed of the
saw.
Do not use a cracked or chipped blade.
Operate in a well-ventilated area. Keep the floor area around the miter saw level and free of
slippery substances or other tripping hazards.
Only use accessories rated at least equal to the maximum speed marked on the tool.
Do not modify the tool in any way.
Always turn off and unplug the miter saw before making any adjustments or repair tasks. Never
adjust the miter saw or the workpiece while the saw is running.