Ironton 61482, Руководство пользователя

Страница: 8 / 17

Page 8 of 17

When using more than one extension cord to make up the total length, make sure each cord
contains at least the minimum wire size required.

If you are using one extension cord for more than one tool, add the nameplate amperes and use
the sum to determine the required minimum cord size.

If you are using an extension cord outdoors, make sure it is marked with the suffix W-A ( W in
Canada) to indicate it is acceptable for outdoor use.

Make sure your extension cord is properly wired and in good electrical condition. Always replace
a damaged extension cord or have it repaired by a qualified electrician before using it.

Protect your extension cords from sharp objects, excessive heat, and damp or wet areas.
Main Parts of Metal Shear
Subassembly
Oil Port
Upper Blade
Lower Blade
Guide
Power Switch
Before Each Use
⚠
WARNING

Use clamps (not included) or other practical ways to secure and support the work piece to a stable
platform. Holding the work by hand or against your body is unstable and may lead to loss of
control.

Designate a work area that is clean and well-lit. To prevent distraction and injury, the work area
must not allow access by children or pets.

Check for loose and damage parts.