Ironton 61445, Руководство пользователя, Страница: 13 / 20

Page 13 of 20
dangerous. This could result in loss of control and serious injury.

After changing a blade or making adjustments, make sure the blade clamp is holding the blade
securely. Loose blades could be violently thrown from the saw.
General Cutting
Hold the saw away from your body and in front of you. With both hands firmly gripping the saw, and
with the blade NOT in contact with the surface to be cut, start the saw by pressing the lock-off button
and squeezing the trigger switch.
Plunge Cutting
1. Mark the workpiece to locate the position of the cut.
2. Clamp the workpiece to a workbench or table.
Note: Make sure the area to be cut is clear under the workpiece so that the blade will not come into
contact with anything other than the workpiece.
3. Select a convenient starting point in the area to be cut out. Place the tip of the blade over that
point.
4. Rest the lower edge of the adjustable pivoting shoe on the workpiece and hold it firmly in that
position, maintaining a shallow cutting angle.
5. Squeeze the trigger switch to start the saw.
⚠
WARNING

Make sure the blade does not touch the workpiece until the saw reaches full speed.
6. With the saw running at full speed, slowly tilt the saw until the tip of the blade contacts the
workpiece and begins to cut. After the blade cuts through the workpiece, tilt the saw upward until
the blade is perpendicular to the workpiece.