Ironton 50134, Руководство пользователя

Страница: 6 / 17

Page 6 of 17
Grounding

The pump must be grounded while in use to protect the operator from electrical shock. It is
equipped with an electric cord that has an equipment-groundingconductor and a grounding plug.
The plug MUST be plugged into a matching receptacle that is properly installed andgrounded in
accordance with ALL local codes and ordinances.

DO NOT MODIFY THE PLUG PROVIDED. If it will not fit the receptacle, have the proper
receptacle installed by aqualified electrician.

CHECK with a qualified electrician or service person if you do not completely understand the
grounding instructions, or ifyou are not sure the tool is properly grounded.
Grounded Tools: Tools with 3-Prong Plugs
Tools marked with Grounding Required have a 3-wire cord and 3-prong grounding plug. The plug
must be connected to a properly grounded outlet. If the tool should electrically malfunction or break
down, grounding provides a low resistance path to carry electricity away from the user, reducing the
risk of electric shock. (See Figure A.)
The grounding prong in the plug is connected through the green wire inside the cord to the grounding
system in the tool. The green wire in the cord must be the only wire connected to the tool’s grounding
system and must never be attached to an electrically live terminal.
Your tool must be plugged into an appropriate outlet, properly installed and grounded in accordance
with all codes and ordinances. The plug and outlet should look like those in the following illustration.