Page of 12
2
Thank you very much for choosing an IRONTON product! For future reference, please complete
the owner’s record below:
Model: _______________ Purchase Date: _______________
Save the receipt, warranty and these instructions. It is important that you read the entire manual
to become familiar with this product before you begin using it.
This machine is designed for certain applications only. The distributor cannot be responsible for
issues arising from modification. We strongly recommend this machine not be modified and/or
used for any application other than that for which it was designed. If you have any questions
relative to a particular application, DO NOT use the machine until you have first contacted the
distributor to determine if it can or should be performed on the product.
For technical questions please call
1-800-222-5381
.
INTENDED USE
The reciprocating saw is designed to cut all types of wood materials, plastic, drywall and metals
such as sheet steel, pipe, steel rods, aluminum, brass, copper and more.
SPECIFICATIONS
•
Item#: --------------------------------------
46181
•
Rated Power: ----------------------------
120V AC, 60 Hz, 6.0 Amp
•
No-Load Speed: ------------------------
0-2500 SPM
•
Stroke Length: --------------------------
13/16” (20 mm)
•
Blade Type: ------------------------------
1/2” Shank
•
Cutting Capacity on Wood: ---------- 4-1/2” (115 mm)
•
Cutting Capacity on Steel: -----------
5/16” (8 mm)
Includes: Saw, Wood Cutting Blade, Metal Cutting Blade, and Allen Key
GENERAL SAFETY RULES
WARNING:
Read and understand all instructions. Failure to follow all instructions
listed below may result in serious injury.
CAUTION:
Do not allow persons to operate or assemble this saw until they have
read this manual and have developed a thorough understanding of how the saw works.
WARNING:
The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions or situations that could occur. It must be
understood by the operator that common sense and caution are factors that cannot be built
into this product, but must be supplied by the operator.
SAVE THESE INSTRUCTIONS
WORK AREA SAFETY:
•
Keep your work area clean and well lit
. Cluttered benches and dark areas invite accidents.
Содержание 46181
Страница 10: ...Page of 12 10 DIAGRAM AND PARTS LIST...
