Page of 16
4
• Dress properly.
Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts. Air vents
may cover moving parts and should be avoided.
• Avoid accidental starting.
Ensure the switch is in the off position before plugging in. Carrying
power tool with your finger on the switch or plugging in power tools that have the switch on
invites accidents.
• Remove any adjusting keys or wrenches before turning the power tool on.
A wrench or
key that is left attached to a rotating part of the tool may result in personal injury.
• Do not overreach.
Maintain proper footing and balance at all times. Loss of balance can cause
an injury in an unexpected situation
.
• If devices are provided for connection of dust extraction and collection facilities,
ensure
these are connected and properly used. Use of these devices can reduce dust related hazards.
• Do not use a ladder or unstable support.
Stable footing on a solid surface enables better
control of the tool in unexpected situations.
• Keep tool handles dry, clean and free from oil and grease.
Slippery handles cannot safely
control the tool.
TOOL USE AND CARE
•
Secure the work piece.
Use clamp or other practical way to hold the work piece to a stable
platform. Holding the work piece by hand or against your body is unstable and may lead to loss
of control.
• Do not force the power tool.
The tool will perform the job better and safer at the feed rate for
which it is designed. Forcing the tool could possibly damage the tool and may result in personal
injury.
• Use the correct power tool for the job.
Don’t force the tool or attachment to do a job for
which it is not designed.
• Do not use tool if switch does not turn it on or off.
Any tool that cannot be controlled with
the switch is dangerous and must be repaired or replaced by an authorized service center
.
• Turn power tool off, and disconnect the plug
from the power source and/or battery pack from
the power tool before making any adjustments, changing the accessories, or storing the tools
.
Such preventive safety measures reduce the risk of an accidental start up which may cause
personal injury
.
• Store idle tool out of reach of children and other inex
p
erienced persons.
It is dangerous in
the hand of untrained users.
• Maintain power tools with care.
Check for proper alignment and binding of moving parts,
component breaks, and any other conditions that may affect the tool’s operation. A guard or any