Ironton 45997, Руководство пользователя

Страница: 10 / 21

Page of 21 10
2. Tighten the tool support clamps.
3. To ensure that no part of the adjustable tool
holder comes into contact with the sharpening
wheel, complete these two checks:
a. Slide the adjustable tool holder back and forth
along the tool support bar.
b. With the bottom of the adjustable tool holder
positioned directly above the wheel, rotate the
sharpening wheel one full rotation by hand.
4. Loosen the two clamps on the adjustable tool
holder enough to insert the blade to be
sharpened. Maneuver the blade until it touches
the sharpening wheel at the desired sharpening
angle.
5. Maneuver the blade within the adjustable tool
holder until the angle of the blade sits flat on the
face of the sharpening wheel.
6. Ensure that the blade is square across the full
width of the sharpening wheel.
7. When you are satisfied that the blade is
correctly positioned, tighten the clamps knobs on
the adjustable tool holder.