Ironton 190F, Руководство пользователя

Страница: 13 / 17

U.S EPA EMISSIONS CONTROL WARRANTY STATEMENT
YOUR WARRANTY RIGHTS AND OBLIGATIONS
The U.S Environmental Protection Agency (EPA) and Northern Tool and Equipment
Company Inc. are pleased to explain the emissions control system warranty on your
2015 and later small None-Road Spark Ignition (NRSI) engines. Northern Tool and
Equipment Company Inc. must warrant the emissions control system on your NRSI
engines for the periods of time listed below provided there has been no abuse,
neglect or improper maintenance of your NRSI engines.
Your emission control system may include parts such as the carburetor, fuel tanks,
fuel caps, fuel lines, the ignition system, and catalytic converter. Also included may
be hoses, belts, S clamps, connectors and other emission-related assemblies.
Where a warrantable condition exists, Northern Tool and Equipment Company Inc. will
repair your small off-road engine at no cost to you including diagnosis, parts and
labor.
MANUFACTURER'S WARRANTY COVERAGE
The emissions control system is warranted for two years. If any emissions-related part
on your engine is defective, the part will be repaired or replaced by Northern Tool
and Equipment Company Inc.
OWNER'S WARRANTY RESPONSIBILITIES
-As the NRSI ENGINE owner, you are responsible for the performance of the required
maintenance listed in your owner's manual. Northern Tool and Equipment Company
Inc. recommends that you retain all receipts covering maintenance on your NRSI
ENGINE, but Northern Tool and Equipment Company Inc. can not deny warranty
solely for the lack of receipts or for your failure to ensure the performance of all
scheduled maintenance.
-As the NRSI ENGINE owner, you should however be aware that Northern Tool and
Equipment Company Inc. may deny your warranty coverage if your NRSI ENGINE
or a part has failed due to abuse, neglect, improper maintenance or unapproved
modifications.
-You are responsible for presenting your NRSI ENGINE to distribution center or
service center authorized by Northern Tool and Equipment Company Inc. as soon as
the problem exists. The warranty repairs should be completed in a reasonable
amount of time, not to exceed 30 days.
12