Page 7 of 12
Assembly steps
Step 1
:
Unpack all contents and compare to the parts list.
Step 2
:
Install four bolts (10) through the left frame (2), tube assembly (1), and right frame (3).
Install the flat nuts
(
9
)
onto the bolts
(
10
).
Do not tighten the bolts until the cross brace (6) installation is complete.
Step 3 :
Place the cross brace (6) onto the frames and install the two bolts (7)cross brace and
frames. Install the flat nuts (8) onto the bolts (7). Tighten.
Step 4:
Tighten bolts from Step 2 now that cross brace (6) has been installed.
Step 5 :
Mount the assembled carrier into the receiver of the vehicle and secure with the 5/8* pin (5)
and 3.8 clip (4)