Page 9 of 16
BB067
Installation Guide
©Copyright 2022 Ironman 4x4 Pty Ltd. No part of this publication may be reproduced or replicated without the prior written consent of Ironman 4x4 Pty Ltd
18.
TO FIT WASHER BOTTLE
:
Remove battery.
Unclip factory wiring loom for
washer pump and pull through into
engine bay. Cut factory plug off the
loom and crimp spade terminals
supplied onto the wires. Connect to
supplied pump as shown.
Shorten factory hose and connect
to washer pump.
Place washer bottle into cavity
behind headlight.
Fit mounting bracket using body
earth bolt.
Fit washer bottle to bracket and
replace battery.
NOTE:
It is easier to connect indicators,
park lights and fog lights during
this process as it allows easier
access to the plugs.
Refer to wiring diagram on
page 16.
19.
Fit supplied protection plates to
bull bar.
Heads of exposed bolts (as shown)
may be spray painted black to
conceal visibility.
20.
Using wing protection plates as a
guide, trim plastic guard liners and
attach using cable ties.
