Iron Ether Divaricator, Руководство пользователя

Страница: 6 / 12

Controls
Threshold:
Sets the level of the incoming
signal at which the noise gate is engaged.
Adjust so that soft or sustained notes don’t
cut off, but muted strings do.
For overt gating effects, set the
Threshold lower on the dial. You can use
this to punctuate a bassline or melodic
phrase by only turning on the high band,
effects loop, and/or exciters when you play
louder. Threshold can also be used to
sculpt the decay time when Density is
active.
Excite:
Controls the amount or strength
of excitation, from none to extreme. All
three exciters are controlled by this single
knob. With all exciters turned off, this
knob changes the sound of the crossover
filter in a subtle but musical way.
X-Over:
Controls the crossover frequency
of the band-split filter, separating the low
and high signal paths.
Clean:
Controls the volume of the clean