Inspection and Maintenance
General Maintenance Check (before operating)
The hydraulic system (hoses, hose connection, rotating unit, etc.) should be carefully
inspected before each use. Also, inspect the mechanical parts at the same time. Make
sure all clamps, nuts, bolts, fittings, etc. are properly installed and tightened.
Do not check for leaks with your hand. Leaks can be located by pass-
ing a piece of cardboard or wood around the suspected leak and look-
ing for discoloration. High-pressure fluid escaping from a very small
hole can be almost invisible. Escaping fluid under pressure can have
sufficient force to penetrate skin, causing serious injury or even death.
If fluid is injected into your skin, it must be treated immediately by a doc-
tor familiar with this type of injury.
Always replace frayed, kinked, or cracked hoses and/or other damaged hydraulic com-
ponents with Iron & Oak authorized parts and components specified in the “Parts” sec-
tion of this manual. Replacement parts from secondary suppliers (not original Iron & Oak
replacement parts) can lead to product damage and/or personal injury, and will void the
warranty.
Should it become necessary to loosen or remove any hydraulic fitting or hose, be sure to
relieve all hydraulic pressure (see tractor’s owner/operator manual).
Specifications
Mechanical Specifications
Maximum grapple opening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 inches
Maximum log diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 inches
Maximum lifting capacity . . . . . . . . . . . . . . . . . . 2000 lbs. (depends on size of tractor)
Hydraulic Specifications
Hook up fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/2 inch NPT
Recommended tractor size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 to 60 HP
Hydraulic operating pressure . . . . . . . . . . . . . . . . . . . . . . . . not to exceed 3,000 PSI
Note:
If your tractor's hydraulic pressure exceeds 3,000 PSI, contact Iron and Oak
before attempting to install or operate the log skidder.
3-Point hitch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Category 1, 2, or 3
Pivot (swing) angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135° in each direction
Unit weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 650 lbs.
Overall shipping size (H x W x L) . . . . . . . . . . . . . . . . . . . . . 34.5 x 31.5 x 81.0 inches
WARNING
Decals
Iron & Oak Commercial Products, Inc.
14
815-672-8596
815-672-8596
15
Iron & Oak Commercial Products, Inc.
Item
Part No.
Description
Qty.
1
BR002521
Decal, Serial Number
1
2
BR002621
Decal, Flag
1
3
BR002667
Decal, Log Skidder
2
4
BR002666
Decal, Keep Back
1
5
BR002654
Decal, PSI Warning
1
(1)
(2)
(3)
(4)
WARNING
(5)
To avoid personal injury or damage to
the hydraulic components, do not use
the Skidder with tractor supplied
hydraulics that are above 3,000 PSI.
BR002654
Содержание SB-05
Страница 13: ...Notes...
Страница 14: ...Notes...
