Thank you for your purchase of an Iron Age Channel Strip. Iron Age Audioworks is a small team
of engineers and designers and we truly appreciate your business. We hope you enjoy using
this as much as we enjoyed making it.
Safety
Safety with audio equipment is normally a matter of common sense, but we want to make sure
you get the best use out of your equipment. So please, use common sense including...
●
Use typical practices for using electrical and audio equipment.
●
Don’t clean this with water or use it around water.
●
Any ventilation openings in the case need to remain open.
●
Don’t use this around anything that’s hot (such as a radiator or space heater).
●
Don’t defeat the ground pin on the plug or use a ground-lift device that does.
●
Don’t use a cut or damaged power cord, and keep the cord from getting pinched or
stepped on.
●
Don’t service the box unless you’re a qualified technician.
Power
The unit is powered by an internal linear power supply and will accept standard 110 VAC
power. A user-accessible fuse is located on the IEC connector at the rear of the case. It will
come set at +/-22V and +48V for phantom power. Please contact us if you would like to
change the supply voltage for use with other op amps.
©2019 by IronAgeAudioworks
1
