iroda AT-2057CR, Инструкция по эксплуатации

Страница: 4 / 7

6 7
• The Flame Adjuster (C) is located at the
bottom of the Lighter.
FLAME ADJUSTMENT
Fig.3
1. Flip out the handle of the Flame Adjuster
and turn counterclockwise (toward “+”)
to set a higher setting. Once lit, you can
turn the Flame Adjuster clockwise or
counterclockwise to set to the desired
length of flame. (Fig. 3)
TROUBLE SHOOTING
To reduce the risk of personal injury, property damage, or damage to
your MICRO JET LIGHTER AT-2057CR , do not attempt to repair the
unit body.
PROBLEM PROBABLE CAUSE HOW TO CORRECT
Cannot
press
down on
the ignition
a. Safety lock not fully
disengaged
b. Previous use was over 5
min causing the lighter to
overheat.
a. Re-read IGNITION steps
b. Wait until lighter has
cooled down
Does Not
Ignite / No
Flame
a. Empty Gas Tank
b. Flame adjuster set too high
or too low.
c. Pushing on/off ignition
switch too fast.
a. Refill with butane fuel
b. Adjust control lever to a
higher or lower position.
c. Re-read IGNITION steps