iRobot Roomba e6 Скачать руководство пользователя страница 8

Roomba

®

 e6 Owner’s Guide

 3

EN

Dual Mode Virtual Wall

®

 Barrier  

(compatible with all models) 

Use the Dual Mode Virtual Wall

®

 barrier 

to keep the robot in the places you want 

cleaned – and out of the ones you don’t. 

It creates an invisible barrier that only the 

robot can see. You can leave the device 

in position between cleanings. 

Choose the mode to meet your needs:

Virtual Wall Mode:

 

When the switch 

is in the Virtual Wall position ( 

), the 

device will create a linear barrier to block 

openings up to 10 feet (3 metres). 

Note: 

This barrier gets wider as it gets 

further from the device (refer to illustration). 

Accessories

10 f

t./3 m

12 in/30 cm

Halo Mode:

 

Toggle the switch to the 

Halo position (

) to create a circular 

barrier. This will prevent the robot 

from approaching zones you want to 

protect such as a pet bowl, vase, or 

under a desk. The Halo barrier extends 

approximately 12 inches (30 centimetres) 

from the centre of the device.

•   You can use the Spot Clean feature to make the robot target 

specific spills. Just place the robot in the centre of the debris and 

press   (Spot Clean). The robot will clean the area by spiralling 

outwards about 3 feet (1 metre) and then spiral inwards to end 

where it started.

•   Keep the robot on the Home Base™ charging station so it’s always 

ready to clean when you need it. If you need to store the robot off 

the charging station, turn off the battery by removing the robot 

from the Home Base charging station and holding down the  

 (Home) button for 9 seconds. All indicators will turn off and you  

will hear an audible tone. You can then store the robot in a cool, 

dry place. To wake the robot up and turn on the battery, plug 

in the Home Base charging station and place the robot on the 

charging station.

•   When the robot is charging, it will turn off the indicator lights  

to save energy. You can check the status by pressing the  

CLEAN button. The Battery Indicator icon will illuminate amber 

when the battery is charging and green when the battery is fully 

charged. Battery charge status can also be viewed in the  

iRobot HOME App.

Note: 

After each use, empty the bin and clean the filter.

Note: 

The batteries will last about 8-10 months under normal use. If you are not 

planning to use your Virtual Wall barrier for an extended period of time, be sure 

to turn the switch to the Off or middle position.

Содержание Roomba e6














Отзывы: