8
Roomba
®
900 Series Owner’s Guide
UK
UK
Basic Operating
Instructions
Cleaning with Roomba
To wake up the Roomba, press CLEAN once. The Roomba will beep
and the CLEAN button will illuminate.
• To start a cleaning cycle, press CLEAN again.
» Roomba cleans an entire level of your home during one
cleaning cycle.
» If its battery gets low before finishing, the Roomba returns to the
Home Base to recharge. After its battery has been recharged,
the Roomba automatically returns to where it left off and
completes the cleaning cycle.
• To pause the Roomba during a cleaning cycle, press CLEAN.
» To resume the cleaning cycle, press CLEAN again.
» To send the Roomba back to the Home Base, press (Dock)
• To end the cleaning cycle and put the Roomba in standby mode,
press and hold CLEAN until the Roomba’s indicators turn off.
Note:
The actions listed above can also be managed from the iRobot
HOME app.
Important:
Before using the Roomba for the very first time, you must
activate the battery. See Step 1: Activate your Roomba on page 6 for
instructions.
