Prep Braava
1a.
Pull out the red rubber insert below Braava’s handle.
1b. Stand Braava on its end to plug the adapter into the charging port.
Charge Braava overnight or until the power button light flashes blue.
1c. Install the included C batteries in the Cube.
Place Cube
3a.
Turn the Cube on. A flashing blue light will appear.
3b. Place Cube on a counter or table with a clear view of the
ceiling. Point the blinking blue light toward the center of
the room.
3a
3b
Clean!
4a. Place Braava on the floor near the Cube and press the power button.
4b. Push the button if sweeping with a dry cloth. Push the button if
mopping with a wet cloth.
4c. Braava’s blue lights will go solid once Braava locks on to the
Cube’s signal. This may take a few minutes.
4d. When finished cleaning, Braava plays a song and returns to where it
started. To turn Braava off, push and hold the power button.
Pause cleaning by pressing any button or picking up Braava.
Refer to owner’s manual for more detailed instructions and product information.
