IWF 2231
5
Settings
Ref. No 31-8930-0201-03/0103
2.
YARN STORE
2.1
The number of windings in the yarn store is regulated by the position of the yarn store
sensor.
2.2
The number of windings needed depends on the weaving machine's speed, the pick
length and the pattern. Irregular patterns require larger yarn stores. Increasing yarn
store variation will also require an increased yarn store.
2.3
For optimal performance the yarn store should contain as few windings as possible. It is
however important that the yarn store does not run out during high demand peaks.
When adjusting always start with a large yarn store and reduce it successively with the
yarn store sensor until there are as few windings as possible left during high yarn demand
peaks.
WARNING!! It is important that there is sufficient clearance between the yarn
store sensor and the oscillating disc. When weaving with very small yarn stores
ensure that the oscillating disc does not touch the sensor after adjustment.
31-8930-0201-03/0103-GB 01-01-18 08.11 Sidan 6
