2
3
Description
1.Cross base
2.Clamp of the base
3.Tube
4.Extension tube
5.Tube height adjustor
6.Back mesh
7.Screw
8.Motor housing
9.Blade
10.Shaft
11.Lock of the blade
12.Front mesh
13.Clip
14.Rotation button
15.Rim
16.Screw
17.Control panel
Important safeguards
Plug out the fan after use and before cleaning.
Before plug out the item place speed switch in “0” position.
To avoid the risk of electric shock, do not place item in water or other liquids and
make sure that it is not flushed with water.
Store the item in suitable place.
Do not leave the switched on fan unattended.
Do not leave fan unattended near children, disabled persons or pets.
Use the item the same way as pointed in the instruction manual.
Do not use the fan if the cord or plug are damaged or if the item has been dropped
before.
Place the fan on stable surface.
Do not touch rotating parts when the fan is switched on.
Avoid placing of foreign objects in air vents or grills.
Do not cover air vents on the body of the item.
Do not use item without mesh.
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or metal capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
Assembling
Assemble cross base (1) by placing one part on another.
Fix the base with help of the
clamp (2).
Place the tube (3) on the cross base and fix it with 4 screws.
Adjust the required height of the tube (
4
) and fix it with screw (5).
Connect the back mesh (6) to the body (8). Make sure that ledges on the motor
housing match the holes on the mesh. Fix the mesh with help of the screw (7).
Connect blade (9) to shaft (10). Fix the blade with lock by turning it counterclockwise.
Connect front (12) and back (6) meshes together
by using rim(15)
.
Fix them with clips
(13)
.
Place assembled motor housing (8) with blade (9) and meshes (6,12) on the
extension tube. Fix the motor housing (8) on the extension tube (4)with help of the
screw (16).
Speed modes
Speed is regulated with buttons on control panel (17)
0 – off
1 – low speed
2 – middle speed
3 – high speed
Rotation of the body
Fan can operate in fixed position or with 90 degree rotation of the body.
Press rotation button (14) to start or stop rotation function.
You can change angle of the body position by turning it in different directions. You can
hear clicks by doing this.
If body can't be fixed in required position you need to tighten the screw.
Cleaning
Plug out fan before cleaning.
Clean dust from the body of the fan with soft cloth.
Spots can be removed by cloth moistened with alcohol.
If you need to clean the blades, take off the front mesh, remove the screw and wash
blades with warm soapy water. Then dry them.
Do not place item in water or other liquids and make sure that motor is not flushed
with water.
Motor does not require lubrication.
The fan should be cleaned regularly.
Do not use solvents for cleaning.
The fan does not require any other care but cleaning.
Attention!
The importer is not responsible for any damage caused directly or not
because of infringement of rules pointed in the instruction manual or unauthorized
intrusion in the construction of the item.
Technical characteristics:
Voltage: 220V/50Hz
Power: 40W
The service life in case of proper use is 2 years.
Not: light indicator has got only decorative function.
Diameter: 4
3
cm
Height: 104
cm
The date of manufacture is marked on the packaging.
The importer retains his right to make changes
in appearance and completeness of the item without preliminary notification to the customer.
For household usage only. Do not leave unattented!
Made in China
