English English
Tips
Checking and replacing the ADF pad assembly
Check if the ADF (automatic document feeder) pad assembly is mounted correctly at the back of the
scanner:
1. Retract the scanner.
2. Press down the 2 latches at the back of the
document feeder to open the rear cover.
3. The rubber part of the pad assembly should be
inserted in the slot.
4. If that is not the case, use your fingers to press
and hold the two sides of the pad assembly to
remove it.
5. Insert the rubber part into the slot and
re-attach the pad assembly.
Note:
you find an extra pad assembly in the
IRIScan™
package, should the current one need replacing
(recommended after 20,000 scans or in case of repeated paper jams).
Should you experience issues when using
IRIScan™ Pro 3 Cloud
, consult the Frequently Asked
Questions on our website
www.irislink.com/support/faq
or contact Technical Support at
www.irislink.com/support.
