IRIS IRIS092, Руководство пользователя

Страница: 5 / 8

Installation Instructions:
Warning:
Installation of this product must only be carried out by a marine electronics professional or competent
person. Failure to observe these installation guidelines and good electrical practices could result in fatal
damage to the product, other on board equipment and personal injury. Observe electrical codes and
practices of the region in which the device is being installed.
When installing on board, it is essential to observe electrical safety precautions associated with the
installation and operation of DC powered electronic equipment in and around water. Ensure the waterproof
integrity of the camera, cables and connection of the device are never breached or compromised. Always
power the device from an appropriately rated fuse board or distribution panel.
Preparation:
The IRIS092 is designed to be mounted onto a flat surface such as a deck, ceiling or bulk head. The camera
is supplied with a mounting bracket which can be discarded if you wish to use an alternative mounting
bracket.
The base of the supplied bracket features an arched cut-out slot through which the camera can be screwed
into place.
Please use suitable cutting tools and appropriately sized drill bits for mounting in accordance with the material
the mounting surface is manufactured from.
It is recommended that the camera is powered up and checked to ensure the desired view can be realised
before any holes are drilled and the camera is fixed into place.
Procedure:
1. Adjust the horizontal viewing angle using the slotted holes in the bracket before the mounting screws are
fixed.
2. Loosen up the screws attaching the camera to the bracket to adjust the viewing angle and then tighten up
all screws to fix the camera in position and secure the bracket to the mounting surface.
IRIS092 Manual v1.0
5