Eyz-On
CVR
User Guide
21214
39
Eyz-On
CVR
User Guide
that a Back-up Settings be performed.
Restoring
Eyz-On
to Factory Settings
One of the choices under
Update
– Device Settings
is the option to restore the
Eyz-On
system to Factory Default Settings. This will reset all users, passwords,
and settings.
Use care when performing this option.
Select Restore Settings to Factory Defaults
o
Restores the
Eyz-On
to a “factory fresh” default configuration
Select “Save” after making your choice
WARNING
, be careful when using
this option as you cannot “back
out” once selected.
If selected, choices are:
“Restart”, which will restart the
Eyz-on
System with the
Factory Default Settings in place.
“Cancel”, which will shut-down the
Eyz-On
system with
Factory Default Settings in place. If you are making this
selection from a remote location, be sure there is someone
physically at the
Eyz-On
system site to perform a power
cycle restart. This is required to resume normal operation of
the
Eyz-On
system.
Hardware Factory Reset Button.
Depress this button and hold for
more than five seconds. Reset will
be indicated by cycling of the LED
indicators.
In addition to a “software” Factory Reset
function described above you may perform
a “hardware” reset. The picture at the right
shows where the reset button is located.
