The Customer and authorised dealer installing person confirm the following (please tick)
The machine has been delivered in
good condition and working order.
An
Operating Manual
has been provided to the Customer.
The contents of the Operating Manual have been explained to the customer, in particular the safety
precautions
and
safe operating practice.
Hazards
regarding the machine have been discussed with the Customer.
The Customer has been trained in the
safe set-up and adjustment
of the machine.
All
machine guards and safety devices
have been identified and their importance discussed with
the Customer.
All
warning and safety decals
on the machine have been identified and their meaning discussed with the
Customer.
The Customer has been instructed and understands the
design capabilities, limitations and capacity
of the
machine.
The Customer has been instructed on the lubrication, daily checks and
maintenance
requirements of the
machine.
The Customer has been trained in the
safe operation
of all machine controls.
The Customer has been trained in the
safe transport
of the machine.
The Customer has been trained in the safe attaching
and removal
of the machine from the tractor.
The Customer has the dealer
contact details
to obtain any further operating and safety advice.
The Customer understands that the fixing of ancillary items or non genuine attachments to the
machine or the
modification
of the machine in anyway may render the machine less safe, and that
advice of the Dealer should be obtained prior to such changes.
The Customer confirms a thorough
review
of the Operating Manual will be undertaken before
operating the machine and that the same will be done by any subsequent operator not present at the
installation
The machine is run up to operating speed and The Customer confirms that
the machine runs smoothly
and
without any vibration
The Customer is confident in operating the machine in a safe and competent manner.
The Installation and Customer Training was carried out on (date) ________ / _________ / 20_____
FARMTECH MACHINERY PTY LTD, 3 TURNER COURT, WODONGA VIC 3690
Ph: 02 6024 6800 Fx: 02 6024 6844
,
www.farmtech.com.au
INSTALLATION & WARRANTY REGISTRATION FORM
On delivery and installation of the machine, this form MUST be completed and signed by the
dealer performing the installation and the customer.
MACHINE MAKE/MODEL:
SN:
CUSTOMER DETAILS:
NAME:__________________________
ADDRESS:_______________________
DEALER DETAILS:
NAME:__________________________
ADDRESS:_______________________
DEALER REPRESENTATIVE:
NAME:__________________________
POSITION:_______________________
SIGNATURE:_____________________
CUSTOMER:
NAME:__________________________
POSITION:_______________________
SIGNATURE:_____________________
A copy of this form MUST be sent to Farm Tech Machinery within 7 days of machine installation.
