11
iCAM Configuration
iCAM7100 Series camera contains an internal configuration interface called iCAM Configuration.
This camera specific interface allows installers to perform configuration and setup options to the
iCAM series unit.
From a PC with an internet browser connected to the network (that the iCAM7100 series unit
is connected to), type the IP address of the iCAM. For example, if the IP address of an iCAM is
192.168.5.100 (default IP), you would access the configuration web interface by typing
http://192.168.5.100 from an internet browser.
To login, the
User ID
required when prompted is
iCAM7000
. The
Password
is
iris7000
.
The system is case sensitive when entering in your login credentials.
Once you have connected to the iCAM Configuration Interface - settings, information, and
options become available to further configure your system. Additional documentation for
setup and configuration can be found at:
http://irisid.com/ss/documentation.htm
How to access the iCAM Configuration interface
External Speaker Out
G
To amplified speaker
Signal
Ground
3.5mm
Allows for connection of an external amplified speaker. This port provides mono (single
channel) audio of voice prompts and other unit sounds. Both the internal and external
speakers can operate concurrently.
